Fertilizers, Pesticides Follow Filling and Capping Machine

• Customization: Available
• Type: Filling and Capping Machine
• Automatic Grade: Automatic
• Model NO.: GXG-3-1K
• Filling Valve Head: Multi-Head
• Feed Cylinder Structure: Single-Room Feeding
• Dosing Device: Capacity Cup
• Filling Principle: Pressure
• Packaging Container Lifting Structure: Pneumatic Lifting
• Structure: Linear
• Packaging: Bottle
• Packaging Material: Film
• Transport Package: Wooden Case
• HS Code: 8422303090

Product Description

 

GXG-3-1K Follow Filling and Capping Machine

1.Introduction 

GXG-3-1K Filling and Capping Machine is an in-line structure. The filling part adopts servo motor-driven following filling and volumetric metering filling principle, which realizes high speed and high precision of filling.

The capping section integrates bottle feeding, capping, capping and bottle discharging, and adopts following movement capping, which has no injury to bottles and caps in the process of capping, and has high capping efficiency, high pass rate and smooth operation.

 

2.Technical Parameters

1	Filling speed	5L:≤1000 BPH *Capacity differs from product, drum and product characteristic
2	Bottle type	Round bottle: Diameter Φ80-140mm Height: 140-340mm Flat square bottle: L 80-140mm, W 80-200mm, H 140-340mm
3	Bottle cap specification	Diameter Φ20-70mm, cap height 20-40mm *Recommended cap height does not exceed cap diameter.
4	Metering precision	≤±5g (5L) *Measuring accuracy varies according to material characteristics, filling volume and feeding device.
5	Height of feed opening	2300mm
6	Diameter of feeding port	Dn50
7	Air pressure	0.6-0.8MPa
8	Power supply/power	~380V   50Hz/11KW
9	Overall Dimension	4175×1490×2150mm(L×W×H)

 

3.Allocation 

No.	Name	Brand
1	PLC	Schneider
2	Touch Screens	Schneider
3	Inverter	Schneider
4	Servo system	Schneider
5	Cylinder	FTEC/AIRTAC
6	Counting photoelectric	SICK
7	Proximity switch	Schneider

4. Features

4.1 Strong versatility: widely used in agrochemical, fine chemicals, daily chemicals, fertilizers, oils and other industries 1-5L bottle automatic filling and spinning.

4.2 Fast speed: adopting automatic following filling, the product completes filling in the process of moving without stopping and shaking the liquid.

4.3 High stability: double servo motors drive the filling mechanism to move up and down, right and left, to ensure the consistency of the filling process without stopping.

4.4 The discharging pipe adopts professional platinum vulcanized silicone steel wire hose, which meets the hygiene requirements of the industry. The filling valve adopts professional three-way valve, filling without dripping.

4.5 Product quality enhancement: Adopting imported motion module controller to control the following capping method, the capping is more stable, the process is non-stop, no shaking liquid, no contamination of the bottle mouth, bottle and conveyor belt, improve product quality and capacity.

4.6 Adopting servo motor-controlled belt bottle dividing, which makes bottle positioning more accurate and ensures high qualified rate of capping.

4.7 Adopting special cap grabber to grab the cap, the capping torque is adjustable. Wear-resistant rubber is designed on the inner side of the gripper, which can effectively eliminate the injury of the cap during the capping process.

4.8 Adopting special cap grabber to grab the cap, the capping torque is adjustable. Wear-resistant rubber is designed on the inner side of the gripper, which can effectively eliminate the injury of the cap during the capping process.