Automatic Microcomputer in-Line Anti-Corrosion Gravity Filling Machine for Fertilzers, Oils

• Customization: Available
• After-sales Service: Online&Visit Service
• Warranty: 1year
• Model NO.: CDP-12E
• Type: Weighing-type Filling Machine
• Automatic Grade: Automatic
• Material Type: Liquid
• Filling Valve Head: Multi-Head
• Filling Principle: Pressure
• Packaging: Bottle
• Inlet Height: 2560mm
• Inlet Diameter: Φ34mm
• Air Source: 0.6-0.8MPa
• External Dimension: 2830×880×2390mm
• Weight: 400kg
• Specification: ~500Kg
• Origin: Jiangsu, China
• HS Code: 8428399000
• Production Capacity: 10 Set/Month
• Package Size: 2950.00cm * 950.00cm * 2400.00cm
• Package Gross Weight: 450.000kg

Product Description

 

 

Microcomputer In-line Anti-corrosion Gravity Filling Machine for Packing Es, Sc Material with Good Fluidity for pesticides, veterinary drugs, daily chemicals, fertilizer

Product Description

Introduction

CDP-12E microcomputer in-line anti-corrosion gravity filling machine is suitable for the filling the good  fluidity materials. The whole machine is in-line structure. It adopts the metering and filling principle of keeping liquid level constant (constant speed) and timing mode, and realizes the precise filling. PLC control, touch-type man-machine interface, easy and intuitive operation of the whole machine.

Drawings

 

 

Technical Parameters

1	Filling Capacity	100mlbottle ≤5000BPH 500mlbottle ≤2800BPH 1000mlbottle ≤2000BPH *water as medium, Varies according to product size, packaging material, material characteristics, etc.
2	Applied Bottles	Round bottle:Φ40-95mm bottle height 80-230mm
3	Filling Err	±1g(50-200mL)±2g(200-500mL)±3g(500-1000mL) *The measurement accuracy varies according to the characteristics of the material, the filling amount and the feeding device
4	Inlet Height	2560mm
5	Inlet Diameter	Φ34mm
6	Air Source	0.6-0.8MPa
7	Power Source	~380V    50Hz/0.7KW
8	External Dimension	2835×880×2390mm(L×W×H)
9	Weight	~400Kg

Process Flow

 

1. Bottle in counting (Automatically inspecting quantity of bottles)
2. Bottle out block (Block out to position packing material)
3. Bottle in block (Block out to stop bottle in)
4. Bottle block (Bottle block is out to block the neck of bottle)
5. Diving filling (Motor diving. Nozzle dives to the bottom of bottles to fill)
6. Raise after finishing (Nozzle raises after material to the end)
7. Back to starting (After finishing, nozzle is back to starting
8. Bottle out block (Bottle out block is back and finished products is conveyed to next position)
9. Bottle in block (Bottle in block is back, empty packing material is conveyed to filling position)
10. Back and forth to finish filling

 

Advanced Features

1. Good corrosion performance, suitable for automatic filling of corrosive liquid with good fluidity.

1.1. The external frame, material box, feed pipe, conveying frame, filling head, liquid level detection, valve, knife retaining seat and so on are made of anti-corrosion PP material with good anti-corrosion performance.

     1.2. Liquid accumulation tank, cylinder block knife, actuator transition parts, filling head lifting parts, photoelectric bracket, threading pipe, exhaust pipe with Spray Teflon Treatment, anti-corrosion performance.

1. Independent electrical box design, toughened glass door cover to seal the machine body, the air exhaust system above the filling head, its interface can be connected with the factory's induced air system to discharge waste gas generated during the filling process, which is safer and environmentally friendly.

3.The filling head uses the air cylinder diving filling method, which can reduce the foam of the foaming material and prevent the contamination of the bottle mouth caused by the overflow of the material.

4.The Electric Control System Adopts Schneider configuration, Integrated Electric Control System, more stable and reliable, safe and green, low energy consumption.

5.The name of the Trachea and photoelectricity mark on the equipment, which is convenient for maintenance and repair.

Multi-channel intelligent detection system

6.1.In addition to normal working liquid level control, high and low liquid level detection and sound and light alarm devices are added to prevent abnormal liquid level.

6.2.The air pressure of SMC in Japan is tested. When the air pressure is lower than the set value, the equipment alarms and stops automatically.


 

 

Application Scenario

Company Profile

Jiangsu Jinwang Intelligent Sci-Tech Co., Ltd (JWIM) established in May 2005. JWIM is a professional manufacturer engaged in agricultural and animal husbandry intelligent factory. We are a high-tech enterprise integrated with R&D, manufacturing, marketing and service.
JWIM products focus on the agriculture and animal husbandry industry, so far it has obtained more than 100 patent certificates, among them JWIM intellectual formulation workshop has 8 invention patents and 8 utility model patents. The products have been exported to more than 50 countries at home and abroad. We have provided professional services to more than 3, 000 agricultural and animal husbandry customers.
In order to adapt to the development of Industry 4.0 and Made in China 2025, the intellectual formulation workshop researched and developed by Jinwang is a safe, environmentally friendly, intelligent, integrated and efficient formulation workshop.
Our products include intelligent processing, intelligent packaging, intelligent storage, intelligent general control and intelligent factory. Our services include operation and maintenance services (Jinwang agrochemical Business School), remote services, contracted services, service station services, integrated workshop transformation services and EPCM services for intelligent factories.
We have an after-sales team of 200 service engineers, including 50 overseas after-sales service engineers, serving Vietnam, Indonesia, Thailand, Philippines and other countries all over the world. The global Internet service center can provide remote services to help customers solve problems online.

Certifications