GXG-3-1K Follow Filling and Capping Machine
1.Introduction
GXG-3-1K Filling and Capping Machine is an in-line structure. The filling part adopts servo motor-driven following filling and volumetric metering filling principle, which realizes high speed and high precision of filling.
The capping section integrates bottle feeding, capping, capping and bottle discharging, and adopts following movement capping, which has no injury to bottles and caps in the process of capping, and has high capping efficiency, high pass rate and smooth operation.
*Pictures are for reference only
2. Machine Dimension
Unit: mm
3.Technical Parameters
| 1 |
Filling speed |
5L:≤1000 BPH
*Capacity differs from product, drum and product characteristic |
| 2 |
Bottle type |
Round bottle: Diameter Φ80-140mm Height: 140-340mm
Flat square bottle: L 80-140mm, W 80-200mm, H 140-340mm |
| 3 |
Bottle cap specification |
Diameter Φ20-70mm, cap height 20-40mm
*Recommended cap height does not exceed cap diameter. |
| 4 |
Metering precision |
≤±5g (5L)
*Measuring accuracy varies according to material characteristics, filling volume and feeding device. |
| 5 |
Height of feed opening |
2300mm |
| 6 |
Diameter of feeding port |
Dn50 |
| 7 |
Air pressure |
0.6-0.8MPa |
| 8 |
Power supply/power |
~380V 50Hz/11KW |
| 9 |
Overall Dimension |
4175×1490×2150mm(L×W×H) |
4.Electrical Configuration
| No. |
Name |
Brand |
| 1 |
PLC |
Schneider |
| 2 |
HMI |
Schneider |
| 3 |
Inverter |
Schneider |
| 4 |
Servo System |
Schneider |
| 5 |
Cylinder |
FTEC/AIRTAC |
5. Advantage
5.1 Strong versatility: widely used in agrochemical, fine chemicals, daily chemicals, fertilizers, oils and other industries 1-5L bottle automatic filling and spinning.
5.2 Fast speed: adopting automatic following filling, the product completes filling in the process of moving without stopping and shaking the liquid.
5.3 High stability: double servo motors drive the filling mechanism to move up and down, right and left, to ensure the consistency of the filling process without stopping.
5.4 The discharging pipe adopts professional platinum vulcanized silicone steel wire hose, which meets the hygiene requirements of the industry. The filling valve adopts professional three-way valve, filling without dripping.
5.5 Product quality enhancement: Adopting imported motion module controller to control the following capping method, the capping is more stable, the process is non-stop, no shaking liquid, no contamination of the bottle mouth, bottle and conveyor belt, improve product quality and capacity.
5.6 Adopting servo motor-controlled belt bottle dividing, which makes bottle positioning more accurate and ensures high qualified rate of capping.
5.7 Adopting special cap grabber to grab the cap, the capping torque is adjustable. Wear-resistant rubber is designed on the inner side of the gripper, which can effectively eliminate the injury of the cap during the capping process.
5.8 The whole machine adopts the latest Schneider electric control system, with stable control and relatively low energy consumption.
){kind=link}