Mosquito Killer PP Material 6 Nozzles in-Line Anti-Corrosion Gravity Filling Machine

• Customization: Available
• Type: Count Filling Machine
• Automatic Grade: Automatic
• Model NO.: CDP-8E
• Material Type: Liquid
• Filling Valve Head: Multi-Head
• Feed Cylinder Structure: Single-Room Feeding
• Dosing Device: Capacity Cup
• Filling Principle: Pressure
• Packaging Container Lifting Structure: Pneumatic Lifting
• Structure: Linear
• Packaging: Bottle
• Packaging Material: Film
• Transport Package: Wooden Case
• HS Code: 8422303090

Product Description

 

CDP-8E Micro-Computer Filling Machine

1.Introduction

CDP-8E Micro-computer Filling Machine is suitable for packing material with good fluidity. It uses vertical structure with constant liquid level and time which realize the precise filling. It is controlled by the PLC, human interface and easy operation.

 

2.Technical Parameters

1	Filling Capacity	100ml bottle ≤5000BPH    500mlbottle ≤2800BPH 1000ml bottle ≤2000BPH *water as medium, Varies according to product size, packaging material, material characteristics, etc.
2	Applied Bottles	Round bottle:Φ40-95mm bottle height 80-230mm
3	Filling Precision	±1.5g(50ml-100ml);±3g(100ml-500ml);±4g(500ml-1L) *The measurement accuracy varies according to the characteristics of the material, the filling amount and the feeding device
4	Inlet Height	2560mm
5	Inlet Diameter	Φ34mm
6	Air Source	0.6-0.8MPa
7	Power Source	~380V    50Hz/0.2KW
8	External Dimension:	1995×880×2630mm(L×W×H)
9	Weight	About 580Kg

3.Allocation 

S.N	Name	Brand
1	PLC	Schneider
2	Touch Screen	Schneider
3	Frequency Converter	Schneider
4	Counting photoelectric	SICK
5	Switching power supply	Schneider
6	Pressure Switch	SMC
7	Cylinder	FTEC
8	Solenoid Valve	FTEC
9	Button	Schneider
10	Alarm Light	Schneider
11	Breaker	Schneider

4.Working Process

5.Features
5.1 Good corrosion performance, suitable for automatic filling of corrosive liquid with good fluidity.

5.2. The external frame, material box, feed pipe, conveying frame, filling head, liquid level detection, valve, knife retaining seat and so on are made of anti-corrosion PP material with good anti-corrosion performance. 


5.3  Liquid accumulation tank, cylinder block knife, actuator transition parts, filling head lifting parts, photoelectric bracket, threading pipe, exhaust pipe with Spray Teflon Treatment, anti-corrosion performance.



5.4 Independent electrical box design, toughened glass door cover to seal the machine body, the air exhaust system above the filling head, its interface can be connected with the factory's induced air system to discharge waste gas generated during the filling process, which is safer and environmentally friendly.


5.5 The filling head uses the air cylinder diving filling method, which can reduce the foam of the foaming material and prevent the contamination of the bottle mouth caused by the overflow of the material.



5.6 The Electric Control System Adopts Schneider configuration, Integrated Electric Control System, more stable and reliable, safe and green, low energy consumption.


5.7 The name of the Trachea and photo electricity mark on the equipment, which is convenient for maintenance and repair.

5.8 Multi-channel intelligent detection system
5.8.1 In addition to normal working liquid level control, high and low liquid level detection and sound and light alarm devices are added to prevent abnormal liquid level.

5.8.2 The air pressure of SMC in Japan is tested. When the air pressure is lower than the set value, the equipment alarms and stops automatically.